Description:
36,000 BTU unit ideal for Commercial and Industrial Applications
10+ KW Cooling capacity
10+ KW Heating capacity
180L/24hrs dehumidifiying capacity
Noise level: 52 dba @ 5 metres
Airflow: 1,450 Cubic m/hour
Efficient Operational Design
Flexible design allows for efficient installation, internally or externally
Only requires a small 240v power supply
Copeland scroll compressor technology
Twin motor fan configuration
Designed For Rental / Industiral applications
The unit incorporates all required:
Includes: fork pockets, easy move castors, simple ducting/power connections
Proven Technology
Proven unit design with 5 years operational experience
40 years of manufacturing history
Investment Return
Quick payback on investment, based on achievable weekly rates
High utilisation due to internal/external positioning & air-conditioning/heating capability
Strong potential for ancillaries revenue
Technical Specification
COOLING: 10.1 kW Nominal* (Internal Spec)
HEATING: 10 kW Nominal* (Internal Spec)
DE-HUMIDIFICATION: 180 Litres/24HRS **
RUNNING AMPS: 12 to 14.5 amps ambient temp dependent
HANDLING: Fork Pockets and Easy-Move castor’s
SUPPLY AIR:
Free blow via grill OR 2 x 300mm dia ducts (20m max)
CONDENSER AIR:
1 x 600mm dia duct or 2 x 300mm dia ducts (5m max)
RETURN AIR:
1 x 600mm dia duct-optional (5m max)
CONTROLLER:
Unit mounted or optional 24 Volt remote controller / thermostat. Unit is supplied with integral controller for A-C, Heating and basic De-Humidifcation operation. (temperature based set-point for DH**).
Specifications are based on Enviromax standard test conditions. Nominal* operating condition is a 12 to 30 deg C db ambient operating temperature range, with a 240V/50HZ power supply (output capacity will vary in relation to operating wet bulb temperature and Relative Humidity conditions, higher ambient conditions will increase the running amps).
**(20 deg C db/75% RH) Optional D-H Controller is required for De-Humidification operation where close control is required on RH. 2006 Production Model-Heat Pump base specification.